Skip to content

Guides

HW19710 gearbox parts for HOWO trucks: wear parts, clutch side and how to identify yours

What the HW19710 gearbox is, which parts wear or are repaired, the clutch-side parts that go with it, and how to identify the exact box before ordering.

Prepared by
CAP Parts Team
Published
Reading time
5 min read
References
1 source

Key takeaways

  1. The HW19710 is a Sinotruk manual gearbox with 10 forward and 2 reverse gears, listed by HOWO dealers among the manual options.

  2. Typical repair parts are synchronisers, gears, the input shaft, bearings, seals and shift or air-assist components.

  3. A slipping or heavy clutch is a separate job: disc, pressure plate, release bearing, booster and cylinders.

  4. Variants such as HW19710T exist, so the box is identified from its nameplate, not from the name alone.

  5. Send the gearbox nameplate and the clutch diameter and spline count; we confirm the version before you order.

On this page
  1. 01What the HW19710 is
  2. 02Why the exact version matters
  3. 03Parts that wear or are repaired
  4. 04The clutch side
  5. 05Repair, rebuild or replace the box
  6. 06How to identify your gearbox
  7. 07Buying tips for workshops and parts dealers
  8. 08What to send us for a quote

Short answer: The HW19710 is a Sinotruk manual gearbox with 10 forward and 2 reverse gears, used on HOWO trucks. Wear usually shows first in the synchronisers, gears, input shaft, bearings and seals, and the clutch side is repaired separately. Identify your exact box from its nameplate before ordering any part.

What the HW19710 is

A HOWO dealer page lists the HW19710 among the manual transmissions offered on HOWO trucks, describing 10 forward and 2 reverse gears, next to the HW19712 and the HW19710T. Details such as ratios, housing and shift assistance differ between sources and variants, so this guide gives no ratios, oil volumes or intervals: take those from the Sinotruk documentation for your exact box.

Why the exact version matters

Sinotruk sells HOWO trucks with several gearbox options, and the manual boxes in that range sit next to each other under similar names. A dealer page lists HW19710, HW19712 and HW19710T together, plus automated manual and fully automatic options. Two boxes with names that differ by one letter can have different parts, so a gearbox part number found in a seller listing is only a lead. Gearbox parts such as gears, shafts and synchronisers are built for a particular box, and a part that looks right on the bench can still be wrong for the ratio set or shaft length.

Keep two habits when you plan a repair: write down exactly what is stamped on the nameplate, and keep the old part until the new one is confirmed against it.

Parts that wear or are repaired

Group Parts What you usually see
Synchronisation Synchroniser rings, sleeves and hubs Crunching or difficulty engaging a gear
Gear train Gears, shafts, input shaft Noise in a particular gear, jumping out of gear, spline wear
Bearings and seals Shaft bearings, oil seals, gaskets Oil leaks, whine, metal in the oil
Shift control Shift forks, rods, control actuator and air-assist parts Heavy or inconsistent shifting
Auxiliary section and PTO (if fitted) Auxiliary gear parts, PTO assembly Noise or leak on the auxiliary side, PTO fit

Whether you repair or replace the whole box depends on the damage and the cost of downtime. That is a workshop decision; we supply the parts either way.

The clutch side

A clutch problem is often reported as a “gearbox problem”. If the truck slips under load, judders when pulling away or has a heavy or sticking pedal, check the clutch before opening the gearbox.

  • Clutch disc, pressure plate and release bearing are normally replaced as a set.
  • Clutch booster (servo) and master and slave cylinders control the pedal feel; leaks and sticking show up there.
  • The gearbox input shaft splines wear against the disc hub, so inspect them when the box is out.

Clutch parts must match diameter, spline count and the pull or push design. Measure the old disc and count the splines; photos help.

Repair, rebuild or replace the box

There is no single right answer, and it depends on what failed. A worn synchroniser or a leaking seal is a repair job; broken teeth, a damaged housing or metal in the oil of a high-mileage box may point to a larger rebuild or a replacement unit. Both routes exist in the trade: complete replacement boxes and individual parts. Ask the workshop for a written list of what is damaged before ordering, and send us that list with the nameplate photo. For fleets, keeping one spare input shaft, a set of synchronisers and a seal kit per gearbox type is a common way to cut downtime; agree the list with your workshop.

How to identify your gearbox

  1. Locate the nameplate on the gearbox housing. Clean it and photograph it so model and serial number are readable.
  2. Note the full model text, including any letter after the number (for example a “T” version) and anything stamped after it.
  3. Take a photo of the gearbox from the side and the top, with the PTO area visible if it has one.
  4. Photograph the vehicle VIN plate.
  5. For a clutch order, send the disc outer diameter, spline count and a photo of the pressure plate label.
  6. Photograph the damaged part, or write the part number if one is cast or printed.

Do not rely on the truck badge alone: the same truck line is sold with different gearbox options. See the Sinotruk page for the brand and the clutch and gearbox parts group for the full list of part types we supply.

Buying tips for workshops and parts dealers

If you stock gearbox parts for several HOWO customers, sort your shelf by nameplate model, not by truck model. Record the model text exactly, including suffix letters, against every part you sell, so a repeat order can be matched in minutes. Ask each customer for a nameplate photo the first time and keep it with the job card. When you quote a repair, list clutch parts as a separate line so the customer sees which items belong to the gearbox and which to the clutch. Dealer and wholesale terms are by agreement, so contact us with your expected volumes.

What to send us for a quote

  • Gearbox nameplate photo (model and serial number)
  • VIN or chassis number
  • The part names and quantities, or a description of the symptom
  • For the clutch: disc diameter, number of splines, pull or push type
  • Photos of old parts and any numbers on them
  • Destination country and whether you need the parts for a repair or a stock order

Use the quote form; we reply with recommended parts and confirm the exact version before you order.

Truck part groups to look at

Frequently asked questions

What is the HW19710 gearbox?
A Sinotruk manual gearbox with 10 forward and 2 reverse gears, listed by HOWO dealers among the manual options. Details beyond that should come from Sinotruk documentation for your exact box.
What is the difference between HW19710 and HW19710T?
They are separate variants listed side by side. Use the nameplate to see which you have, because parts may differ. We confirm the version before quoting.
Which HW19710 parts wear out first?
Synchronisers, gears and the input shaft splines are common repair items, together with bearings and oil seals. Clutch parts wear separately.
How do I know if the problem is the clutch or the gearbox?
Slipping, judder and a heavy pedal usually point to the clutch or its booster. Noise in a specific gear or a gear popping out points to the gearbox. A workshop inspection confirms it.
Can I find the gear ratios on the nameplate?
Do not assume so. Ratios are in the manufacturer documentation. Ask for the document for your exact model.
Do you supply the PTO assembly?
Send the gearbox nameplate and photos of the PTO area and we will tell you what we can supply.

Sources

  1. [1]HOWO Truck Transmission Options: Manual, AMT and Auto Systems. Genron Truck and Trailer.

CAP Parts Team — CAP parts team — sourcing and checking Chinese truck and bus parts for fleets and workshops abroad. About CAP

Parts mentioned in this guide

Tell us about your project

Share the application, site location and your requirements — our engineers will reply with a matching configuration.

Request a quote →
Talk to a parts specialistSend a part number or a photo on WhatsApp
WhatsAppMy list 0