Guides
King Long and Higer Bus Parts: What Operators Need to Know Before Ordering
King Long and Higer bus parts for operators: how the brands relate, identify the bus and part, service parts list and what to send for a quote.
- Prepared by
- CAP Parts Team
- Published
- Reading time
- 6 min read
- References
- 4 sources
Key takeaways
King Long and Higer are related: public sources describe Higer (Suzhou) as a subsidiary of King Long (Xiamen). That does not mean every part is shared. Confirm by VIN and number.
No official English parts catalogue for either brand turned up in our search. Expect to work from the bus VIN, model code and the old part.
King Long model codes start with XMQ, Higer codes with KLQ in public sources. Use them to describe the bus, not to assume fitment.
The most ordered parts are service items: brakes, clutch, suspension, steering, lamps, switches and door parts.
Send us the VIN, part number or photos and we confirm the exact version before ordering.
On this page
- 01How King Long and Higer relate
- 02Reading model codes without over-reading them
- 03What buyers can expect from catalogues
- 04Service parts operators order most
- 05Step by step: identify the bus and the part
- 06Mixed fleets and parts overlap
- 07How city, intercity and school operators plan spares differently
- 08From a failed part to a confirmed order
- 09Why a nameplate photo beats a description
- 10What to send us for a quote
Short answer: King Long and Higer buses are different brands with a corporate link, so the first step is to identify which one you actually operate, then the bus VIN and model code. We did not find an official English parts catalogue for either brand, so identification by number, VIN and photo is the normal route. Send those and we confirm the right version before you order.
How King Long and Higer relate
According to Wikipedia on King Long, King Long United Automotive Industry is headquartered in Xiamen, Fujian, was founded in December 1988 and lists Higer Bus and Golden Dragon among its subsidiaries. Higer Bus is described as based in Suzhou, Jiangsu, founded in December 1998, with King Long as its parent. The Chinese name of Higer in the same article is the Suzhou King Long company, which is why you will see the names mixed in invoices and shipping papers.
For a parts buyer, this has one practical effect: the same vehicle can be called by different names in different markets, and two buses with similar looks may use different components. Do not search only by brand. Search by number and VIN.
Reading model codes without over-reading them
Public sources show these code families:
| Brand | Code pattern seen in public sources | Examples named there |
|---|---|---|
| King Long | XMQ + number + letters | XMQ6127, XMQ6129Y, XMQ6120C, XMQ6900 |
| Higer | KLQ + number + letters | KLQ6129G, KLQ6118GS, KLQ6127Q |
King Long’s own export history includes 12 m coaches and suburban buses sold in Europe (a 2010 Gasgoo report names XMQ6127, XMQ6120C and XMQ6900). Higer buses appear in markets such as Russia and Tanzania in Wikipedia photographs. These are examples of the names that exist. They do not tell you what is on your bus, which depends on the build and year.
The code on the nameplate and the VIN go together. If the plate is unreadable, photograph the engine plate and gearbox plate as well.
What buyers can expect from catalogues
Searching for a King Long or Higer parts catalogue returns multi-brand supplier pages and marketplace listings, not an official lookup. Supplier pages list several Chinese brands together, and retailer pages list single parts. For a good catalogue layout, look at how a mature manufacturer does it: the OMNIplus BusParts Catalog describes searching and ordering parts online around the clock. Chinese brands rarely give that publicly, so a supplier who can match your VIN or part number is the substitute.
Service parts operators order most
The following is general workshop practice, not King Long or Higer data.
| System | Typical wear or failure items | Our catalogue |
|---|---|---|
| Brakes | shoes, linings, chambers, slack adjusters, valves | brake parts |
| Clutch and drivetrain | clutch disc, release bearing, booster, propeller shaft joints | drivetrain parts |
| Running gear | shock absorbers, air springs, hub bearings, height valves | running gear |
| Steering | tie-rod ends, ball joints, pumps | steering |
| Electrical and body | switches, lamps, door pumps, wipers, control boxes | electrical, body |
Items we list that carry a King Long or Higer label on our site include a shock absorber assembly, a front wheel hub bearing, a power switch control box, a clutch disc and a combination switch. Seeing a part with a brand label here means we handle that item. It is not a promise that it fits your bus. For the brand pages see King Long and Higer.
Step by step: identify the bus and the part
- Photograph the VIN plate and the model plate. Note the year and country of registration.
- Note the engine and gearbox type from their plates.
- Locate the part number on the old part and photograph it.
- Photograph the old part from all sides and the surrounding area.
- State the position (front / rear, left / right, door).
- Write down symptoms if the problem is a failure: leaks, noise, no movement.
- Send everything in one message so we can confirm the version.
Mixed fleets and parts overlap
Operators running King Long, Higer, Yutong and Golden Dragon in the same fleet often ask whether parts can be pooled. Some components come from the same third-party suppliers, but the only safe check is the part number on both old parts. If two numbers are identical, tell us and we confirm. If they differ, treat them as different parts.
How city, intercity and school operators plan spares differently
This is general fleet practice, not King Long or Higer data. City and airport-shuttle operators run many stops, so doors, brakes, lamps, switches and wipers are the usual spares. Intercity and tour coach operators put more weight on the clutch, gearbox, suspension, tyres and cooling, because a breakdown is far from the depot. School-bus operators need every bus on the road for fixed daily runs, so lamps, mirrors, door parts and brake wear items come first. Mixed fleets often keep one shelf of parts that are common across brands only after comparing numbers on the old parts, never before.
From a failed part to a confirmed order
- The workshop removes the part and photographs it, with the number visible, before cleaning and again after cleaning.
- The part is tagged with the bus fleet number and position and kept until the new one has been fitted and tested.
- The buyer collects the VIN, the model code from the plate and the engine and gearbox plates.
- One message goes to us with all photos, a one-line symptom and the quantity.
- We answer with the version we propose and any open questions, such as side, connector type or mounting.
- The order is placed only after the number or the photo match is agreed by both sides.
- On arrival, the workshop compares the new part with the old one, face by face and connector by connector, before fitting.
- The confirmed number is written against the bus in your records, so the next order for that bus is one line.
Why a nameplate photo beats a description
Descriptions such as “the left bracket near the front axle” are read differently by every person. A photograph of the nameplate and the part, taken straight on, removes the guesswork. For King Long and Higer buses in particular, where model names can look similar between related brands, the model plate and the VIN are the identifiers we ask for first. If the plate is painted over or worn, photograph the engine and gearbox plates and the chassis stamp instead, and tell us which you could find.
What to send us for a quote
- Brand, model code, VIN, year and country
- Part numbers and photos (old part, plates)
- Position, quantity and whether you need genuine, OEM-source or aftermarket options
- Destination port or city
Use the quote page or contact us. Stock, lead times and minimum quantities are agreed per order. Related reading: Yutong bus parts catalog and doors, body and electrical parts.
Frequently asked questions
- Is there an official King Long bus parts catalogue online?
- We did not find a public official English catalogue for King Long or Higer. Operators normally work from the VIN, model code and part number, and ask a supplier to confirm the version.
- Is Higer part of King Long?
- Public sources describe Higer Bus (Suzhou) as having King Long as its parent. Parts may still differ by model and year, so confirm by number and VIN.
- Where do I find the model code of my bus?
- On the model and VIN plates. King Long codes begin with XMQ and Higer codes with KLQ in public sources. Photograph the plates and send them.
- Can I use Yutong parts on a King Long or Higer bus?
- Do not assume it. Compare the part numbers on both old parts. Some components may share a supplier, but only an identical number is a safe match.
- What are the first King Long parts to stock?
- General practice: brake, clutch, filter, lamp and door parts that wear quickly. Build the list from your own repair history rather than a generic list.
- Can you supply parts without a part number?
- Yes, usually. Send the VIN and clear photos of the old part and we confirm the version, or tell you what else we need.
Sources
- [1]King Long. Wikipedia.
- [2]Higer Bus. Wikipedia.
- [3]King Long luxury buses being shipped to Italian buyers. Gasgoo.
- [4]BusParts Catalog. OMNIplus.






