Skip to content

Guides

How to identify your Chinese truck or bus before ordering parts: VIN, chassis and engine plates

Where to find the VIN or chassis number, engine, gearbox and axle plates on a HOWO, Shacman or other Chinese truck or bus, and what photos to send.

Prepared by
CAP Parts Team
Published
Reading time
8 min read
References
3 sources

Key takeaways

  1. A parts supplier needs the VIN or chassis number plus the engine, gearbox and axle plates; the truck brand and "HOWO" or "Shacman" alone are not enough.

  2. Where the number sits differs by model and year; check the cab area and the frame, the owner manual and the registration papers.

  3. The VIN follows the 17-character structure of ISO 3779, but Chinese model codes (such as those starting ZZ on many Sinotruk models) have their own structure; do not guess the meaning, ask your dealer.

  4. Take photos in good light, of the plate and the number, with the whole vehicle for context; a photo of a legible plate is better than a typed number.

  5. Trucks and buses are often modified or re-engined, so always photograph the actual engine and gearbox plates rather than relying on the registration.

On this page
  1. 01Why the brand name is not enough
  2. 02What the VIN is
  3. 03Where to look
  4. 04Step by step
  5. 05Photo list: what to send
  6. 06What each plate tells your supplier
  7. 07Buses and coaches
  8. 08Why a clean record pays off
  9. 09Second-hand and imported trucks
  10. 10How to write the message
  11. 11Common mistakes
  12. 12What to send us for a quote

Short answer: To identify a Chinese truck or bus for parts, find the VIN or chassis number, then the engine nameplate and the gearbox and rear-axle plates, and photograph each with the whole vehicle for context. The VIN is a 17-character code under ISO 3779, but location and coding vary by model, so check your manual and registration documents and send the photos to your supplier to confirm which parts-book entry applies.

Why the brand name is not enough

“HOWO” or “Shacman” names a brand family. Within it there are different cabs, engine types, emission versions, gearboxes and axles, and a part for one variant may differ from the one for another. DocShipper’s sourcing guide describes first-time importers buying the right item name but the wrong variant because the supplier’s catalogue pictures did not match the exact chassis series. A VIN or chassis number plus the component plates narrows the variant down. Public model databases show how detailed it gets: a single HOWO listing may give a model code beginning ZZ, a separate chassis code, an engine code and the wheelbase.

What the VIN is

A VIN (vehicle identification number) is a 17-character code of digits and capital letters (excluding I, O and Q). Its content and structure are defined by ISO 3779 and its location and attachment by ISO 4030. In general it starts with a world manufacturer identifier, followed by a descriptor section and a serial section. Chinese commercial vehicles also carry a model code and often a separate “chassis number”. Do not try to decode the characters yourself: a dealer or the manufacturer’s records can interpret yours.

Where to look

Positions vary by model and year; owner manuals show them. The table lists common places to check. These are starting points, not a guarantee for your model.

What Where to check What it tells the supplier
VIN / chassis number A plate in the cab area, a stamp on the frame, the registration papers; the owner manual shows the position for your model Model, build, which parts-book entry applies
Vehicle model plate Position given in the owner manual Model code and maker data
Engine nameplate On the engine block or a plate near it Engine type and number, the key to engine, filter and fuel-system parts
Gearbox plate On the gearbox housing Gearbox type, important for clutch, shafts and synchronisers
Rear-axle / drive-axle plate On the axle housing Axle type and ratio, important for hub, brake and differential parts
Front-axle plate On the axle beam Axle type for wheel-end and steering parts
Cab type The cab shape and badges Cab body parts, glass, lamps and mirrors
Bus: chassis and body Chassis plate and body plate, often separate Bus brand, body maker and engine, since body and chassis may come from different makers

Because the position depends on the model and year, do not stop at the first number you find: look at the cab area and the frame, read the owner manual, and compare what you find with your registration documents.

Step by step

  1. Park on level ground, clean the plates. Wipe away dirt and grease without scratching the stamped numbers.
  2. Find the VIN or chassis number in the places above. Photograph the plate and any frame stamp.
  3. Photograph the engine nameplate, then the gearbox plate and the axle plates.
  4. Take photos of the whole vehicle: front, side, cab from the front, and the engine bay.
  5. Take a close photo of the old part you want to replace, with a ruler.
  6. Write the numbers down by hand as well as by photo, in case a picture is unreadable.
  7. Check against the registration and note any differences (a re-engined truck often shows an engine that does not match the papers).
  8. Send everything to your supplier and ask them to confirm which catalogue entry applies (see how to find the right part number).

Photo list: what to send

Photo Tips
VIN / chassis plate and frame stamp Light from the side, no flash glare; number readable
Engine nameplate Whole plate in frame
Gearbox plate and axle plates One photo each
Whole vehicle, front three-quarter view and side Shows cab type and body
Engine bay Shows the engine, turbo and ancillaries
Old part, 3–4 angles with a ruler The marked face, mounting points and ports
Registration document (optional) Confirms the model and year the authorities recorded

What each plate tells your supplier

Plate Where to look (general terms) What to photograph Why the supplier needs it
Vehicle plate and VIN In the cab area and on the frame; the owner manual shows the exact position The whole plate, then the stamped number close up Links the truck to its build record and the correct parts book
Engine nameplate On or near the engine; check the manual The whole plate, in focus Engine type and number decide filters, fuel system, gaskets, belts and many internals
Gearbox plate On the gearbox housing The whole plate Clutch, input shaft, synchroniser and gear parts depend on the gearbox type
Rear-axle plate On the axle housing The whole plate and the axle housing Hub, bearing, brake and differential parts depend on the axle type
Front-axle plate On the front axle The whole plate Wheel-end and steering parts depend on the axle type
Cab and body The vehicle itself Front three-quarter view and side Cab body parts, glass, mirrors and lamps differ by cab type

If a plate is missing, painted over or unreadable, say so in your message and send the best photos you have. Do not copy a number from another vehicle.

Buses and coaches

For buses the picture is more complicated than for trucks, because the chassis and the body can come from different makers, and the engine can be a separate brand from both. Record these separately: bus brand and model name, chassis number, engine type and number, gearbox type, and the body maker if it is different. Photograph the chassis plate and the body plate, the engine nameplate and the gearbox plate. Door mechanisms, glass, interior and air-conditioning parts belong to the body, while engine, clutch, axle and brake parts belong to the chassis, so tell the supplier which part of the bus the part is on. The bus parts catalogue is organised by system, and brand pages such as Yutong, King Long and Higer show what we list. We confirm the exact version once we have your plates.

Why a clean record pays off

Keep a one-page record for each vehicle in the fleet with the VIN, the engine, gearbox and axle types, the photos and any changes made later (engine swap, axle change). The next order is then a message, not a research project. A record also shows quickly where trucks of the same model differ, which is common in mixed fleets bought second-hand.

Second-hand and imported trucks

Trucks bought second-hand or imported from another market are where identification goes wrong most often. The truck may have been re-engined, had its gearbox or axle replaced, or been rebuilt after an accident, so the plates on the components may not match each other or the registration. Treat each component as its own item: photograph each plate and record each type. If two plates disagree with the paperwork, say so in your inquiry rather than choosing one, and let the supplier tell you which entry applies to the part you need. For a mixed fleet, repeat the record for every truck, even when they look identical from outside, because two trucks of the same model can still differ in engine or axle type.

How to write the message

Open with the vehicle (brand, model name, year if known), then the VIN or chassis number typed out, then the three component types you could read from the plates, then the part you need and how many. Attach the photos with short names such as engine-plate or rear-axle-plate. One clear message with photos usually gets a clear reply; a message that only says the brand and a part name usually leads to a list of questions.

Common mistakes

  • Giving only the brand (“HOWO 371”) without VIN or plates.
  • Copying the number from the registration without checking the frame, which may differ if the chassis was replaced.
  • Sending a photo of an engine plate from a different engine because the truck was re-engined or you photographed a spare.
  • Assuming a bus has one maker: chassis and body often differ, so the bus plates and engine type matter.
  • Trusting a generic VIN decoder for a Chinese commercial vehicle.

What to send us for a quote

Send the photos in the table above and the part you need, with quantity, through the quote page or contact us. We confirm the exact version for your truck or bus. For your brand see Sinotruk, Shacman, FAW Jiefang, Dongfeng and the bus brands.

Truck part groups to look at

Frequently asked questions

Where is the VIN on a HOWO truck?
It depends on the model and year. Check the cab area and the frame, read the owner manual and compare with the registration papers. A dealer can show you the position for your model.
What is the difference between VIN and chassis number?
On many Chinese commercial vehicles the VIN and the chassis number are related but are shown separately on plates and stamps. Photograph both and send them; your supplier can tell you which one applies to the parts book.
Can I decode a Sinotruk VIN online?
Generic web decoders are built around other markets, so ask a dealer or manufacturer record to interpret it. What you can rely on is the ISO 3779 structure: 17 characters, no I, O or Q.
What does ZZ at the start of a HOWO model code mean?
Public model databases show many Sinotruk model codes starting ZZ, but public sources do not explain what the characters mean, so we do not decode them here. Confirm with a dealer.
How do I identify the engine of my truck?
Find the nameplate on the engine block or a plate nearby and photograph it. It gives the engine type and number, which decides filters, fuel-system and many engine parts.
Why do suppliers ask for gearbox and axle plates?
Clutch, shaft, hub, brake and differential parts vary with the gearbox and axle type, so the plates narrow down the exact variant faster than the truck brand alone.
What if the plate is missing or unreadable?
Send the frame stamp, photos of the engine, gearbox and axle, the whole vehicle and the old part, plus the registration papers. A supplier can often work from these, but may need to ask a dealer for confirmation.

Sources

  1. [1]Vehicle identification number (ISO 3779 and ISO 4030). Wikipedia.
  2. [2]Chinese truck parts sourcing guide (catalogue and chassis-series mismatches). DocShipper.
  3. [3]Sinotruk Howo ZZ4187N3517D1 tractor unit (model, chassis and engine codes in a model database). Auto-che.

CAP Parts Team — CAP parts team — sourcing and checking Chinese truck and bus parts for fleets and workshops abroad. About CAP

Parts mentioned in this guide

Tell us about your project

Share the application, site location and your requirements — our engineers will reply with a matching configuration.

Request a quote →
Talk to a parts specialistSend a part number or a photo on WhatsApp
WhatsAppMy list 0