Skip to content

Guides

HOWO Cab and Body Parts: Mounts, Mirrors, Lamps, Bumpers, Wipers and Door Parts

HOWO cabin parts and body parts: identify the cab version, see which parts are ordered most (mounts, mirrors, lamps, bumpers, wipers, doors), what to send.

Prepared by
CAP Parts Team
Published
Reading time
6 min read
References
4 sources

Key takeaways

  1. Cab parts depend on the cab version, not only on the truck name. Doors, mirrors, lamps, grille and bumper can all differ between cab versions of the same brand.

  2. Identify the cab from the VIN, the data plate and photographs of the front, the door and the dashboard before you order a body part.

  3. The cab mounts, the cab tilt cylinder and the lamps and mirrors are the most common wear and damage orders. Check mounts and rubber for cracks, play and noise.

  4. Photograph the broken part and its mating surfaces with a ruler. For lamps and switches add the connector and its pin count.

  5. Send us the part number, VIN or photos and we confirm the exact version before you pay.

On this page
  1. 01Why the cab version matters
  2. 02Which cab parts are ordered most
  3. 03Cab mounts, suspension and tilt
  4. 04Mirrors, lamps, bumpers, wipers
  5. 05Preventing the next replacement
  6. 06What to send us for a quote

Short answer: HOWO cabin and body parts are ordered by cab version, so identify the cab first (VIN, cab data plate and photos of the front, door and dashboard) and then the part. The parts that most often need replacement are cab mounts and suspension parts, mirrors, lamps, bumpers, wipers and door parts. Send the old part number or photos and we confirm the version before you pay.

Why the cab version matters

Sellers list HOWO cabs under names such as HW76 (one seller describes a “HOWO HW76 Cabin Assembly” on its listing page), but a listing name is not an identification. The same truck brand has been sold with different cab shells, and what looks the same from the driver’s seat can have different door panels, hinges, mirror brackets and lamp housings. Body parts also change with the year of production. For that reason, do not order a door, mirror or lamp from the truck name alone. Use the data on the truck.

Our identification guide explains the VIN and nameplates for Chinese trucks, and the HOWO catalogue and part number guide explains how part numbers are written. For cab work, the useful checklist is below.

  1. VIN plate or sticker. Photograph it and write the year of build.
  2. Cab data plate or label, if the cab carries one (often inside a door frame or on the cab structure). Photograph it in daylight so the numbers are legible.
  3. Front view of the cab with the grille, headlamps, bumper and mirrors in frame.
  4. Side view showing the door, the step and the mirror arm.
  5. Dashboard and steering wheel so we can see the switch layout and the instrument cluster.
  6. The damaged part from the front, the back and the mating surfaces, with a ruler or coin for scale.
  7. Left or right and front or rear for every part. Write them out; do not rely on the photo.

Which cab parts are ordered most

This table is workshop experience, not data from a manufacturer. Which part wears or is damaged depends on the work: mining and quarry trucks suffer more mounts, lamps and mirrors than long-haul trucks.

Group Typical items What to send
Cab mounts and tilt Cab mounts, rubber bushes, brackets, cab tilt cylinder, gas struts, lock hooks Number, photos of mount and bracket, side where fitted
Mirrors Main mirror, wide-angle mirror, arm, glass, bracket Photo of the arm and the mounting plate, left or right
Lamps Headlamp, fog lamp, rear combination lamp, indicator, marker lamp Connector photo, pin count, lamp number, left or right
Bumpers and trim Front bumper, bumper brackets, step, grille, fender Front photo, photo of brackets and holes
Wipers Wiper motor, arm, blade, linkage, washer parts Photo of motor and linkage, spline or shaft end
Doors Door lock, handle, hinge, window regulator, seal, door glass Number on the lock or handle, photo of the door edge
Switches and trim Window switch, mirror switch, light switch, seat parts Back-of-switch photo with pin count

Examples we list in these groups are the bumper, the rear-view mirror, wiper arm 520500612, wiper linkage 520500610, the driver door lock and the gas strut. They are examples of what we handle. They are not a statement that a particular part fits your cab.

Cab mounts, suspension and tilt

A cab sits on mounts that carry the cab, absorb vibration and, on tilting cabs, hold it in place when it is down. A US supplier explains what failing mounts look like in its cab-mount FAQ: cab vibration, misalignment, unusual noise or uneven mounting, with a check of the mounts, brackets and related hardware for wear or damage. It also says that failing mounts can reduce stability and operator comfort and recommends inspecting brackets, fasteners and bushings whenever the mounts are replaced. That advice carries over to any heavy truck, including Chinese trucks.

What to do in the workshop:

  1. Look at each mount with the cab down and the engine running: movement or a gap that opens and closes means play.
  2. Check rubber for cracks, oil contamination and split bonding. Check springs and dampers if the cab has them.
  3. Check the brackets and the cab floor around the mounts for cracks and corrosion.
  4. Check the bolts for stretching, rust and thread damage. Replace the fasteners the manual says to replace.
  5. On a tilting cab, check the tilt cylinder and hoses for leaks and the lock hooks for wear and correct engagement.
  6. Re-check alignment of doors and bonnet panels after the work.

A seller’s page for a HOWO cabin lifting cylinder describes it as the hydraulic part that lifts and lowers the cab for maintenance and inspection. That matches the usual layout, but check on your truck: some cabs use a manual pump, others a different mechanism. Tell us which you have, and send a photo of the cylinder or pump and the mounting points.

Mirrors, lamps, bumpers, wipers

Mirrors. The glass is cheap and the arm and bracket are the expensive part, so decide which one is broken. Photograph the mounting plate, the arm joint and the connector for a heated or electric mirror.

Lamps. Order by position (left or right, front or rear), the lamp function and the connector. A rear combination lamp often has several chambers and a multi-pin plug; the pin count and layout decide the part, as with our rear combination lamp 4133-00023 page for the sort of listing we keep. Check the lamp housing, the seal and the wiring, not just the bulb.

Bumpers. A bumper is a set of parts: the bumper itself, brackets, any lower trim and the lamps in it. Send a photo of the front with the bumper off the truck or of the mounting holes if possible.

Wipers. A weak wiper may be the motor, the linkage, the arm or the blade. Check by hand that the linkage moves freely, then identify the motor; a motor has a number on its label and a shaft end of a certain shape.

Doors. Lock, handle and window regulator are the usual orders. A door part is usually left- or right-specific, so write it down.

Preventing the next replacement

  • Wash the underside of the cab regularly where road salt, mud or mining dust sit; corrosion starts at the mounts and door sills.
  • After an impact, check the cab mounts and brackets even if the panel damage looks small.
  • Keep lamp connectors greased and clean to cut intermittent faults.
  • Replace cracked wiper blades before the arm scratches the glass.

For the first year of a new fleet, see our first-year spares list, and for the wider catalogue see cab and body parts for Chinese trucks and the Sinotruk page.

What to send us for a quote

  • VIN photo and year of build.
  • Cab data plate photo, if there is one.
  • Photos of the front, the side and the dashboard.
  • Close photos of the damaged part, with a ruler, and its part number if it has one.
  • Left or right, front or rear, and the quantity.
  • Your country and port, so we can discuss packing; panels and glass need careful packing.

Use the quote form or the contact page. We confirm the exact version before you pay.

Truck part groups to look at

Frequently asked questions

How do I identify my HOWO cab version?
Start with the VIN and the cab data plate if there is one, then photograph the front, the side with the door and mirror, and the dashboard. Do not rely on the truck name alone; send the photos with the VIN and we confirm the version.
What are the most common HOWO body parts to replace?
In general workshop experience: mirrors, lamps, bumpers, wiper parts, door locks and handles, and cab mount rubber. Mining and quarry trucks add damage to panels and steps.
How do I know if my cab mounts are worn?
Typical signs are vibration in the cab, noise over bumps, misalignment of doors or panels and cracks or movement at the mounts. Inspect the mounts, brackets and bolts together and follow the manual.
Can I order cab parts by the HOWO model name only?
It is risky. Cab parts depend on the cab version and the year, so send the VIN, plate and photos. We confirm the version before quoting.
What does a cab lifting cylinder do?
On a tilting cab, a hydraulic cylinder or pump system lifts and lowers the cab so the engine can be reached. Check hoses and fittings for leaks and have it repaired before working under the cab; use any safety stay the manual describes.
Do you list Sinotruk cab parts for other brands too?
Our truck brand pages cover Sinotruk, Shacman, FAW Jiefang, Dongfeng, Foton Auman, JAC and Beiben. Tell us the brand and send the VIN, and we tell you what we can list.
Which photos help most when ordering a mirror or lamp?
The part from front and back, the mounting plate or bracket, the connector with its pins, and a ruler for scale. Add left or right.

Sources

  1. [1]SINOTRUCK HOWO HW76 Cabin Assembly (seller listing). Standard Motors on take.app.
  2. [2]SINOTRUK HOWO Cabin Lifting Cylinder (seller listing). Standard Motors on take.app.
  3. [3]Cab Body Mounts for Heavy-Duty Truck Cabs. Wofford Truck Parts.
  4. [4]Cab & Body Parts. FridayParts.

CAP Parts Team — CAP parts team — sourcing and checking Chinese truck and bus parts for fleets and workshops abroad. About CAP

Parts mentioned in this guide

Tell us about your project

Share the application, site location and your requirements — our engineers will reply with a matching configuration.

Request a quote →
Talk to a parts specialistSend a part number or a photo on WhatsApp
WhatsAppMy list 0