Skip to content
Light trucks

JAC N-Series Spare Parts for Light and Medium Trucks

JAC's export light trucks are sold as the N-Series, from N45 to N140. Here is what the family covers and how to identify yours before you order parts.

Short answer

JAC N-Series parts are ordered by model (N45, N55, N65, N75, N90, N110, N120, N140), engine, gearbox and brake type, because the family spans roughly 3.5 to 14 tonnes GVW with Cummins engines from 2.7 to 4.5 litres. Send the VIN, the engine and gearbox nameplates or a photo of the old part, and we confirm the version before quoting.

JAC N-Series: key facts

  • JAC's export site presents the N-Series with single, one-and-a-half-row and double cabs, wheelbases from 2,490 to 5,300 mm, GVW from 3.5 to 14 tonnes and emission levels from Euro I to Euro VI.[1]
  • The N-Series model list shows N45, N55, N65, N75, N90, N110, N120 and N140, each with its own chassis designation.[1]
  • Cummins engine options listed are 2.7 L (Euro III to V), 3.0 L (Euro VI), 4.0 L and 4.5 L (Euro VI), paired with ZF transmissions.[1]
  • One listed entry-level configuration has a 2.438 L engine, a 5-speed manual gearbox, hydraulic drum brakes, a 180x65x4.5 mm frame section and 7.00R16LT tyres.[1]
  • Safety and chassis electronics listed on the N-Series page include ABS, ESP, electronic parking brake, advanced emergency braking, lane-departure warning and hill-start assist.[1]
  • JAC has exported since 1990 (first to Bolivia) to more than one hundred countries; light trucks are described as a popular export product.[2]
  • Some JAC exports go as knock-down kits assembled overseas, in countries including Egypt, Ethiopia, Vietnam, Mexico and Iran.[2]

JAC N-Series at a glance

ItemDetail
ModelsN45, N55, N65, N75, N90, N110, N120, N140[1]
GVW3.5 to 14 t[1]
Wheelbase2,490 to 5,300 mm[1]
CabsSingle, one-and-a-half row, double[1]
EnginesCummins 2.7 L, 3.0 L, 4.0 L, 4.5 L (other engine on an entry version)[1]
EmissionEuro I to Euro VI[1]

N-Series, Shuailing and the names you will see

JAC's own export site shows its light and medium trucks as the N-Series. Chinese-market model lists also name JAC light-truck lines such as Shuailing, Junling and Kangling. Buyers in different countries therefore meet different names for trucks from the same maker, and dealers sometimes use a local trade name. Rather than rely on the name, treat the VIN and the chassis plate as the identity of the truck. That is what we match parts against.

How wide the N-Series really is

The published N-Series range runs from the N45 at the small end to the N140 at the heavy end, with GVW from about 3.5 to 14 tonnes, wheelbases from 2,490 to 5,300 mm and three cab sizes. Engines on the current export page are Cummins units from 2.7 to 4.5 litres with ZF transmissions, while an entry configuration lists a 2.438 L engine and a 5-speed gearbox. The result is that two N-Series trucks in the same fleet can share almost no engine-side or driveline parts.

Emission level is another dividing line. Euro I to Euro VI trucks are all published under the same family name, and exhaust, fuel and sensor parts follow the emission version. If you are not sure of it, a photo of the engine nameplate and the exhaust arrangement tells us.

What wears first on light-truck duty

In delivery and distribution service, general workshop experience points to clutches and gearbox linkage, brake friction parts, wheel bearings, leaf springs and bushings, steering joints, filters and cooling items. Versions with ABS, ESP and electronic parking brake add sensors and wiring to that list. Always follow the service intervals in the truck's manual rather than a general rule.

Because some JAC trucks are assembled overseas from knock-down kits, the exact specification of a truck can differ from the factory-built version of the same model. That is another reason to identify your truck by its plates and nameplates rather than by catalogue name alone.

Choosing between original, OEM and replacement

Light-truck owners often run on tight margins, so the grade question comes up early. Original parts come through the maker's channel, OEM parts are made by the supplier that builds for the maker, and replacement parts are made to fit the same position by other makers. Our guide on genuine, OEM and aftermarket Chinese truck parts explains the differences. For wear items such as brake friction parts and filters, many fleets compare grades; for engine-internal and electronic parts, more of them stay with original or OEM. Prices depend on grade, quantity and version, and we quote per order.

How to order

Send the VIN, the model code on the chassis plate, engine and gearbox nameplate photos, the brake type and the emission level if you know it. Add a photo of the old part with a measurement. We reply with the part we recommend and the grade options, and we do not state fitment from the model name.

Recommended parts for JAC N-Series

Pick the parts you need and add them to your list, or ask on WhatsApp. For the exact model and version, contact us and we confirm it with you.

Crankshaft for trucks

Engine

Crankshaft

Ask us for the number

WhatsApp
Propeller shaft for trucks

Clutch & Gearbox

Propeller shaft

Ask us for the number

WhatsApp
King pin kit for trucks

Steering

King pin kit

Ask us for the number

WhatsApp
U-bolts for trucks

Axle & Suspension

U-bolts

Ask us for the number

WhatsApp
Intercooler for trucks

Cooling & Filter

Intercooler

Ask us for the number

WhatsApp
Rear-view mirror for trucks

Cab & Body

Rear-view mirror

Ask us for the number

WhatsApp

Ordering tips for JAC N-Series trucks

  • Photograph the chassis plate and VIN; write down the model (N45 to N140) if shown.
  • Send engine and gearbox nameplate photos; engines range from small entry units to 4.5 L Cummins.
  • Tell us whether the truck has air or hydraulic brakes and whether it has ABS or ESP.
  • Mention if the truck was assembled overseas from a kit; it may differ from the factory spec.
  • State quantity and grade wanted (original, OEM or replacement); terms by agreement.

JAC N-Series truck parts: questions answered

Is JAC Shuailing the same as the JAC N-Series?
Chinese-market lists name Shuailing as a JAC light-truck line, while JAC's export site shows the N-Series. Names vary by market, so we identify trucks by VIN and plates, not by name.
Which engines do JAC N-Series trucks use?
JAC's export page lists Cummins engines from 2.7 L to 4.5 L with ZF transmissions; an entry configuration lists a different 2.4 L engine. Confirm from the engine nameplate.
How heavy are JAC N-Series trucks?
The family is published from about 3.5 to 14 tonnes GVW, depending on model, so check your GVW rating before ordering axle or brake parts.
Do I need the VIN to get a quote?
It is the fastest way. If you do not have it, nameplate photos and a photo of the old part are usually enough to start.
Do JAC N-Series trucks have ABS?
The N-Series page lists ABS, ESP and electronic parking brake among its systems, and one entry configuration lists ABS as standard. Tell us which system your truck has.
Can you supply parts for kit-assembled JAC trucks?
We handle the request by truck data, so send the VIN and nameplate photos and we confirm the version.

Ask for JAC N-Series parts

Send the part names or numbers, the quantities and your truck model or VIN. Our sales team checks each item and replies on WhatsApp.

Light-truck series

Quick inquiry

* Fill in at least one. We usually reply on WhatsApp.

Your inquiry is emailed to our team, then WhatsApp opens with it filled in. We use your details only to answer this inquiry. See our Privacy Policy.

Sources

  1. JAC N-Series (models, specifications) — JAC Motors
  2. JAC Group — Wikipedia
Talk to a parts specialistSend a part number or a photo on WhatsApp
WhatsAppMy list 0