Skip to content
Sinotruk

HOWO T7H spare parts

The T7H is the MAN-technology generation of the HOWO range. This page covers what is published about its engine, gearbox, axles and cab, and how to get the right parts confirmed.

Short answer

The HOWO T7H is the Sinotruk heavy truck released in 2013 with MAN technology, sold as a tractor and a dump truck, with manual and AMT gearbox versions. Published material names a common-rail engine, HW gearboxes and MC / V-series axles, but versions differ by build year and configuration, so we confirm every line from your VIN, nameplates or old part before quoting.

HOWO T7H: key facts

  • Sinotruk released the HOWO T-series heavy trucks in April 2013 and described them as its first product built with German MAN technology, equipment and inspection standards.[2]
  • Both the T7H and the T5G are described as using MAN design concepts, and the cab crash test is reported to meet Swedish standards.[2]
  • A Shanghai logistics company ordered 25 T7H trucks with an AMT gearbox, after Sinotruk explained the advantages of its MAN-technology engines, axles and frame.[1]
  • The 6,000th T7H was handed over at a ceremony in Jinan in May 2014; the same report says some of the MAN-technology trucks had passed 400,000 km.[2]
  • In 2018 Sinotruk added a HOWO T7H LNG dump truck to a group of eight models aimed at highway use and engineering construction.[3]
  • The manufacturer page lists four T7H cab options: flat floor with flat roof, flat floor with high roof and a wide double bunk, low floor with flat roof for engineering work, and low floor with high roof.[4]
  • The same page describes a four-point cab suspension, a front anti-roll bar and air springs at the front and rear of the cab.[4]
  • Its engine description names a Bosch high-pressure common-rail system with injection pressure up to 1,600 bar, a compacted-graphite iron cylinder block, a fuel module that combines pre-filter, hand pump, filter and water drain, and an oil module that combines filter, oil-gas separator and cooler.[4]
  • The alternator, air-conditioning compressor and water pump run on an automatically tensioned multi-rib belt, so the belt can be changed without removing the fan.[4]
  • The gearbox is described as an HW-series unit with twin countershafts and a planetary range section, with MC-series drive axles and V-series steering axles.[4]

HOWO T7H at a glance

ItemDetail
ReleasedApril 2013 (HOWO T-series)[2]
EngineSinotruk engine built with MAN technology; Bosch common rail, injection pressure up to 1,600 bar[4]
Cylinder blockCompacted-graphite cast iron[4]
GearboxHW series (twin countershaft with planetary range); AMT on some trucks[4]
AxlesMC-series drive axles, V-series steering axles[4]
CabFour configurations: flat or low floor, flat or high roof[4]
Fuel versionsDiesel; an LNG dump truck was added in 2018[3]

What the published details tell a parts buyer

The T7H is easy to confuse with other HOWO trucks, and that is where ordering mistakes start. A fleet may run T7H tractors with a common-rail engine next to an older dump truck with an earlier engine, and the badge on the grille is the same. What the published material does give you is a clear map of the systems that matter for spares: a common-rail engine with modular fuel and oil filtration, an HW-series gearbox, MC-series rear axles and V-series steering axles, and one of four cab layouts.

Each of these maps onto a group of parts we handle. The engine and its filter modules sit under our engine and cooling and filtration groups, the gearbox and clutch under the clutch and gearbox group, the axles and wheel ends under axles and suspension, and the cab, mirrors, steps and lights under cab and body and electrical. None of this tells us which version your truck carries, which is why we ask for plates and photographs rather than a model name.

Where T7H trucks wear first

Wear follows the work, not the model. T7H tippers on loaded hills and rough tracks use up clutch parts, brake linings and drums, hubs and wheel bearings, springs and bushes; tractors on long hauls use filters, belts, the water pump, brake chambers and valves and air-dryer cartridges on a steadier schedule. Our guide to tipper and mining wear lists the usual items in more detail.

The modular design described by the manufacturer changes how you order some of these. Because the fuel pre-filter, hand pump and water drain are grouped in one module, and the oil filter, oil-gas separator and cooler are grouped in another, a leaking seal or a damaged housing can be a module-level order rather than a single gasket. Photograph the module in place and send the number cast or stamped on it; we confirm the exact version before quoting.

The accessory drive is worth a photograph too. With an automatically tensioned multi-rib belt driving the alternator, air-conditioning compressor and water pump, a worn tensioner shows up first as belt noise or a belt that wears quickly, and the belt, tensioner and idler are normally ordered together. Send the belt length printed on the old belt if it is still readable.

Cab choice matters for body and electrical parts

Four cab layouts means four sets of body parts. A flat-floor high-roof long-haul cab and a low-floor flat-roof engineering cab differ in height, bumper position and trim, so a mirror, a step, a bumper section or a lamp is not interchangeable by assumption. When you order cab parts, say which layout you have, send a photograph of the cab front and side, and tell us the build year. For electrical items such as starters, alternators, switches and lights, send the nameplate or a clear photograph of the connector and fixing points.

Manual, AMT and LNG versions

Published reports describe T7H trucks with an AMT gearbox, and an LNG dump version appeared in 2018. Both change the parts list: an AMT truck has actuator and control items that a manual truck does not, and an LNG truck has a different fuel system and engine. Tell us at the start which version you operate, and treat the gearbox plate and engine plate photographs as the deciding documents.

How we handle a T7H order

Send the VIN, engine plate, gearbox plate and axle plate photographs, the part number if you have it, and a photograph of the old part from three sides. We check the list against these, tell you the version we recommend and the grade it is offered in (original, OEM or replacement), and quote only after the version is confirmed. We never assume a part from another HOWO series is correct for a T7H.

Recommended parts for HOWO T7H

Pick the parts you need and add them to your list, or ask on WhatsApp. For the exact model and version, contact us and we confirm it with you.

Crankshaft for trucks

Engine

Crankshaft

Ask us for the number

WhatsApp
Centre bearing support for trucks

Clutch & Gearbox

Centre bearing support

Ask us for the number

WhatsApp
Leaf spring for trucks

Axle & Suspension

Leaf spring

Ask us for the number

WhatsApp
Window regulator for trucks

Cab & Body

Window regulator

Ask us for the number

WhatsApp

Ordering tips for HOWO T7H trucks

  • Photograph the engine plate first; the T7H name alone does not say which engine variant you have.
  • Send the gearbox plate and say whether the truck is manual or AMT before ordering clutch or gearbox parts.
  • For fuel and oil filtration, photograph the module on the truck and send the cast number, because the module groups several parts together.
  • For cab parts, state the cab layout (floor height and roof height), the build year and a photograph of the front and side.
  • Tell us if the truck is an LNG version; the fuel system and engine parts are different from the diesel truck.

HOWO T7H truck parts: questions answered

Is the HOWO T7H a MAN truck?
No. It is a Sinotruk truck. Sinotruk describes the T-series as its first product built with MAN technology, equipment and inspection standards, with MAN design concepts and engines developed with MAN technology. Parts are Sinotruk parts, and we confirm the version from your plates.
Which engine does the T7H use?
Published material describes a Sinotruk engine built with MAN technology and a common-rail fuel system. The exact engine variant depends on the truck, so read the engine plate and send us a photograph before ordering engine parts.
Can I use T5G or T6G parts on a T7H?
Do not assume it. The series differ in engine, gearbox, axle and cab, so we confirm every line from the VIN, plates or part number before we quote.
Does the T7H come with an AMT gearbox?
Some do. Published reports describe T7H trucks with an AMT gearbox, and other trucks use manual HW-series gearboxes. The gearbox plate settles it.
What should I send for a T7H parts quote?
The VIN, engine, gearbox and axle plate photographs, the part number or a photograph of the old part, the quantity, your destination and the grade you want. We reply with the recommended version and a quote.
Do you supply T7H LNG parts?
We can quote LNG-specific parts after we see the nameplates and the part itself, because the fuel system differs from the diesel truck.

Where HOWO T7H trucks run

Ask for HOWO T7H parts

Send the part names or numbers, the quantities and your truck model or VIN. Our sales team checks each item and replies on WhatsApp.

Other Sinotruk series

Quick inquiry

* Fill in at least one. We usually reply on WhatsApp.

Your inquiry is emailed to our team, then WhatsApp opens with it filled in. We use your details only to answer this inquiry. See our Privacy Policy.

Talk to a parts specialistSend a part number or a photo on WhatsApp
WhatsAppMy list 0